|
Australian Pipeline Valve Range of Valves & Materials
Materials
- Cast Iron, Ductile Iron (GGG40, etc...)
- Carbon steel (ASTM A105, LF2, A216 WCB, WCC, LCB, LCC etc...)
- Alloy Steel (ASTM A217 WC6 / WC9 / C12A, A182 F11 / F22 / F91, AISI 4130 / 410 etc...)
- Stainless Steel (A351 CF8 / CF3/ CF8M / CF3M / CF8C, A182 F304 / F304L / F316 / F316L / F321 / F347 / F44 / F904L etc...)
- Duplex / Superduplex / Special Alloy
End Connections
- Flanged end rating PN6 / 10 / 16 / 20 / 40..., 150 Lbs, 300 Lbs, 600 Lbs, 900 Lbs, 1500 Lbs, 2500 Lbs etc... (RF, RTJ)
- Buttweld, socket weld or threaded ends
- Etc...
Valve Types
Gate Valves
- Wedge type
- Parallel slide
- Through conduit type
Globe Valves
- Screwdown non return
- Piston type
- Ball type
- Swivel disc type
- Right angle type
Check Valves
- Swing type
- Axial flow / Nozzle type
- Wafer type
- Spring return type
Ball Valves
- Floating type
- Trunnion Mounted type
- Metal seated type
- Top Entry
- Double block and bleed
|
Plug Valves
- Standard design
- Lubricated type
Butterfly Valves
- High performance PTFE insert type
- Double / Triple offset metal to metal tight shut off type
Choke Valves
- Angle body control type
Strainers
- Y type
- T type
- Bucket type
Diaphragm Valves
PFA / PTFE Lined Valves
Valve Locking Devices |
Valve & Instrumentation Division
Valve Actuation Centre
Actuator:
- Actuator sizing for new multi turn valves,
- Site survey of existing hand operated valves (multi & part turn) for retrofit,
- Design & Supply of adapter plates between actuator & valve (MSS SP-101 & 102 - ISO 5210 & 5211), machining of drive nuts & operating shaft adapters, supply of hardware for MOV assembly,
- Actuator mounting, installation, configuration & precommissioning, including for DDC valve control,
- Warranty site follow up (LIMITORQUE & PALADON approved),
- Site Inspection, Diagnostic, Repair, Suggestions, Modification and Upgrade,
- Actuator Training Courses,
- Repair and Testing in our VAC
|
 |
|
Home Page