PRESSURE/TEMPERATURE A105N BODY For superheated steam etc. consult chart. F11, F22, F5 chrome-moly available body for high temperature applications. Class Cat No. Test Pressure to API598 (PSIG) Working Pressure Shell (Hydro) Seat (Hydro) Seat (Air) CWP WOG Saturated Steam (at 260°C)* 150 (AS/BST D to F) 150-710VWXU-S 450 315 80 280 170 300 (AS/BST H to J) 300-710VWXU-S 1125 815 80 720 600 600 600-710VWXU-S 2225 1628 80 1440 1200 900 900-710VWXU-S 3350 2442 80 2190 1800 1500 1500-710VWXU-S 5626 4078 80 3600 3000 STANDARDS COMPLIANCE: Basic Design: ANSI B16.34, BS 5157 Face to Face Dimension: ANSI B16.10 End to End Dimension: ANSI B16.10 Flanged Ends: ANSI 16.5 B.W. Ends: ANSI B16.25 S.W. Ends: ANSI B16.11 Drilling to ANSI or BS/AS2129 Table D to H or AS4087 / AS4331 / ISO7005-1 PN 10 to 250 Pressure/Temperature ratings to ANSI B16.5 ­­ O.S. & Y. Rising Stem Full Port, Expanded Parallel Slide Gate Valve, Double Disc, Bolted Bonnet, Integral Seal Rings - Metal to Metal. Mechanically loaded seating for low and high pressure sealing. Parallel slide dual loaded discs ensure superior shut off and allow by-pass/bleed fitment (double block and bleed requires soft seat inserts). Pressure/temperature charts available on request. Available in A105N, F22, F11, F5, 316, 304 etc. Key Operated Version (Integral Flanges) Seating Code Body Seat Surface Part No. 3 Double Disc Surface Part No. 4 Stem Part No. 5 Back Seat (Stuffing Box) Part No. 10 X F6 F6 F6 F6 U Stellite Stellite F6 F6 XU Stellite F6 F6 F6 P* F304 F304 F304 F304 R* F316 F316 F316 F316 M* Monel Monel Monel Monel N* Alloy 20 Alloy 20 Alloy 20 Alloy 20 H* Hastelloy B Hastelloy B Hastelloy  B Hastelloy B TRIM MATERIAL CODES * Add XU modifier to end of model suffix if stellite seat, if stellite seat & disc add U modifier to end. Body Material Codes None A105N 0 Special 5 A182 F5/F5A 6 A182 F11 8 A182 F304/304L 8M A182 F316/316L 9 A182 F22 Quick acting - Uniflo style lever or key operated continuous boiler blow down valves (blow off) for installation in applications such as industrial, mining and mechanical services. Suitable for super-heated steam, H.T.H.W steam condensate and water. This design consists of two discs, kept in contact with parallel body seats, using the line pressure & sprung seating action to effect tight closure. Temperature changes in the line are accommodated by the expanding disc and do not affect the action of the valve. When being opened or closed, the discs slide across the seat faces, dislodging any foreign matter. The valve operating stem is outside screw rising through the handwheel. These valves are suitable for full bore steam use, where a low pressure drop across the valve is required. Also suitable for water, oil, gas, etc. Also available in Globe style, quick acting. PART NUMBER SYSTEM STEAMCO - Cast Steel Steam Valves PARALLEL SLIDE BLOWDOWN VALVE RACK & PINION - QUICK ACTING PARALLEL SLIDE BLOWDOWN VALVE CAT 710VW CLASS 150-2500 (15~50NB) 15